Counting matching models…
A simple gridfinity bin for the Klein Tool 65200 hex bit ratchet. I got the one without the bits, but feel free to modify it if you have the 4 bits.
This is a replacement drain cap for the CW-5200 and CW-5202 Water Chiller. I printed my replacement with a 100% infill, also added 16mm O-ring to help with seal.
A simple case for a lipo battery. No mounting points, just to prevent damage to the soft case battery
Adaptor to utilize a more in-ear generic silicone tip for a Plantronics 5200. May need to be modified for your silicone tip choice. Improved comfort, device stability and sound quality. v3 refined for printability and slightly thicker…
I added extra layers at the top / bottom and perimeters for strength. M3 mounting screws fit perfect in the holes to the ESCs.
Desktop holder for the rempte control of a Plantronics/Poly Blackwire 5200/5220. Holes for 2x M6 screws for added weight. Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Add…
A simple wall holder to hang the Philips Series 5000 beard trimmer/shaver on the wall. Stick it to the wall with double-sided tape (I used Tesa Power Stripe). Printed without any supports
This tray is intended to catch water drops and ice chunks after dispensing on the Samsung fridge RS22T5200S9 (and similar models).
The Nikon Coolpix 4200, 5200, 5900, and 7900 cameras have a common failure where the tabs on the battery cover door break off. This prevents the door from being able to fully close. I've designed a 3D printed replacement for the door…
Design: Adapter designed to mount perfectly to the Plantronics Voyager PLT 5200 headset and to interface with a standard soft in-ear rubber earbud (plug). Design software: FreeCAD Dimensions: envelope is about 10mm long x 6mm diameter.…
In an attempt to free more space on my retro games shelves, I have been finding these sorts of cartridge racks and printing them. Then I started making some. This is my Atari 5200 cartridge rack. It did free up some space on my shelves,…
I made this support because I realized that the fan is at the bottom of the equipment, it got very hot due to not having an air intake for the fan. With this support now my router does not heat up anymore and stopped crashing.
I made this belt holder as a battery holder for my DJI FPV goggles. Zeee 2S Lipo: https://www.ebay.de/itm/144804334415
Replacement fuel cap for a Parker Strimmer / Bush Cutter / Weed Whacker (PGBC 5200 but may fit other models) Includes small vent hole
Very simple model, just print on the flat side. I used two recycled vape batteries from disposables and then put on a cheap 7.4v bms I got a pack of 10 from amazon for $5~
für TOMTOM GO 5200 und GO 6200 Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: Doesn't Matter Category: Automotive
This is a battery box and cover for a Multistar 6sx5200mah 10C lipo. I developed this box for the Firefly6 but it could be used for just about anything using this lipo. Unfortunately the box will stick out above the wing of the Firefly6…
This is a replacement door for the back panel for the Atari 5200 for those looking to install Sophia 2 which has a DVI-I port! It takes some effort to take the old one out, and then pop this one in (takes a bit of effort). I printed with…
TomTom GO 5200 incl. Accessories Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: Doesn't Matter Category: Automotive
This is a replacement water supply cap for the CW-5200 and CW-5202 Water Chiller. This can be printed without any supports.
Simple mount for Newboler "1000" lumens 5200 mAh bicycle light.
Halter für die Thule Tension Rafter und Thule Sun Blocker G2 Spannstange für die Pössl 2WinR Heckgarage. Verschraubungen: Halter - Platte: 1x M5x25 Platte - Buegel: 4x M5x60 Buegel links mit Aussparungen für die Schrauben am Lattenrost.
I had to redraw everything, but it's still a remix, thanks to the author for the idea.
These are Atari 5200 video game cartridge storage cases that I created in Tinkercad with labels, the tops fit secure and snug with no supports. Most of the files I created are also on Thingiverse https://www.thingiverse.com/thing:4554877
A replacement plunger/pusher for the magimix 5200/4200 food processor Clean and easy print. fits perfectly. much cheeper than ordering the original one. Enjoy.
Carcasa para proteger a lo que seria el Adaptador de Corriente Alterna y al cable
This tray is intended to catch water drops and ice chunks after dispensing on the Samsung fridge RS22T5200S9 (and similar models).
Brake Caliper Adapter 'Dog Bone' To fit a AP racing CP5200 Caliper To suit a Mazda MX-5 Miata NA/NB Spacing to use a DBA 5040.1S rotor. I've included the f3d file so you can tweak/adapt to suit your need.
This model is compatible with the lego system.
A simple wall holder to hang the Philips Series 5000 beard trimmer/shaver on the wall. Stick it to the wall with double-sided tape (I used Tesa Power Stripe). Printed without any supports
My wife picked up a Vitamix 5200 at a garage sale. It was missing a rubber foot. This is a model for a front foot of a Vitamix 5200. I printed it in Flexfill 98a
Мijiа Мi Rоbоt Vасuum Сlеаnеr (SКV4000GL, SКV4000СN, SКV4022GL, SDJQR01RR, SDJQR02RR, SDJQR03RR) Мijiа Мi Rоbоt Vасuum Сlеаnеr 1S (SКV4054СN) Rоbоrосk Swеер Оnе S5 s50/s51/s55 (S502-00, S502-02, S512-00, S512-02, S522-00, S522-02,…
Short stand to raise the power supply up a bit, with a cubby to keep your cord stowed away to prevent it from getting mangled and tangled in everything else on your workbench when not in use 😀 Category: Tool Holders & Boxes
Marine sealants are expensive and dont come with caps because they consider them as a one time use. Save your sealants. Other caulking cap models won't work as the threads are too coarse. Its imperative to follow instructions precisely to…
