Counting matching models…
Note: Print standing up on the printers finest resolution, since the threads are fine and tolerances are tight. I recommend printing the STEP file and not the STL. A nozzle for 310 ml/0.1 gallon sealant cartridges that actually fits. The…
his wall-mounted caulk and sealant tube holder is designed to keep your workspace neat and organized. It features pre-made screw holes for easy and secure installation on any wall or workbench. Perfect for storing multiple tubes, it…
Sometimes in the work you have to apply glue or sealant in a certain way and these devices should help to solve the problem. These nozzle spouts are removable and are consumable. You don't need a lot of time and material to print them.…
Every time I reach for a caulking tube, the surrounding caulking tubes tend to fall over. To prevent this, I created a caulking tube rack. It’s available in 1x3, 2x3, and 3x3 sizes. I printed it in PLA using standard settings, and it…
I seem to have a growing collection of sealant cartridges, some are still partially full after the job or I have one or two left... Silicone in lots of colours, acryl, glue, etc. etc. I store them in boxes and crates, and it got a bit…
Simple! it's all in the summary. Print with TPU for maximum durability.
Sealant Scraper Tool - Thumb or Finger Replacement Part :) Keep your thumb or fingers free from sticky sealant when you finish it after application. The corners are identical for each provided tool in the range of 9 to 25 mm in diameter…
Organizer to hold up to three tubes of caulk / sealant. You can print two of the ends and space them how you want or print the full version that has a brace between them. Both versions have holes for screws and can be mounted on the wall,…
Sealant stamp simple and easy to print. Before stamping, remember to apply oil or a similar substance to the heated sealant. This will help prevent
Fuel sealant gas caps, for use with 24mm diameter hole. A two-ringed design allows a tight fit for the outer wall with the gas cap. Printed with a flat end on the print bed. Use supports for small lips for a better surface to seal with…
Organizer that holds four tubes of standard 48mm OD Caulk/Sealant. Two versions are provided: One that sits on the edge of a shelf, and the other hangs on a wall. Both can be mounted using two #8 screws. Print fits on a standard MK3/MK4…
Remix der Verschlusskappe für Silikon Kartuschen. Geändert habe ich die Aussenform, welche nun ohne Raft oder Support gedruckt werden kann. Außerdem habe ich den Gewindeansatz konisch gestaltet, da meine Kartuschen am Auslass alle konisch…
i made this silicon tube holder so that they are easy to find i printed it at a 0.2 layer height with 12% infill and with PET-G you just need 2 x 35mm screws to attach to shed ect.. if attaching to brick work longer screws may be required…
Remix der Verschlusskappe für Silikon Kartuschen mit integriertem Dichtring. Muss daher mit TPU gedruckt werden, sonst wird es nicht flexibel genug werden zum Abdichten. Remix of the cap for silicone cartridges with integrated sealing…
Silicone sealant applicator designed to get clean corners when sealing sinks baths etc. Model in fusion 360 it has a 5mm, 10mm and 20mm curve. This has been test printed using polymaker PolyFlex™ TPU95 at 15% infill You can see the full…
Two funnels, the 1.5oz version works in almost all wheel set ups. The larger 2oz+ works in wheels with low spoke counts. Save the locknut on a presta valve inner tube to glue into the small end of the funnel to thread onto the presta…
For OpenSCAD you need download threads.scad by Dan Kirshner. https://dkprojects.net/openscad-threads/ https://dkprojects.net/openscad-threads/threads.scad
I prefer to add slime to all my bicycle tubes. Combined with tire liners, it's a great way to minimize flats. Slime tubes are sized for Schrader valves, so using with Presta style is messy. This adaptor provides a good seal with the tube…
English: A practical wall-mounted holder accommodating up to five silicone tubes. Perfect for workshops, garages, kitchens, or any area requiring streamlined organization! This holder is meticulously designed for convenient and neat…
Made it for my own need, saving marine silicon sealant for the next time. The pipe was to set a nicer string of silicon around a window. The threads might match other tubes too, like Abbas caviar and mustard tubes. Let us know where it…
Modeled in fusion 360, not yet printed. Print the valve in PETG / ABS / PC or something similar with good layer adhesion for strenght. Print the valve in flex material, i will try china TPU when i have a slot in my queue :) Category:…
This is an orange, 3D-printed holder designed to store sealant or caulk cartridges on an IKEA SKÅDIS pegboard system . It provides a practical, space-saving solution for organizing these specific tools in a workshop, craft room, or…
Remix Short nozzle 1mm Hole Use a Drill to make it bigger :-) Print Settings Printer: Craftbot Plus Rafts: Yes Supports: No Resolution: 0.2 Infill: 30 Filament: No Name PLA White Category: Tools
Čistič špičky kartuše silikonu
I was fed-up with my tubes of caulk and sealant always falling over when I pack them away, so I made some clips that clip two tubes together. You can print as many of these as you like in a regular PLA and then clip a bunch of tubes…
This is sealant cartridge nozzle with cap to prevent hardening of the sealant while storage.
Print the funnel using a brim. Once printed, glue a presta valve lock ring into the top of the funnel. Markers on funnel at 10ml increments. For best results use clear filament and add color changes for each marker to easily see while…
Note: Print standing up on the printers finest resolution, since the threads are fine and tolerances are tight. I recommend printing the STEP file and not the STL. A nozzle for 310 ml/0.1 gallon sealant cartridges that actually fits. The…
I believe this fits most of the guns in the market. front or back.
Just a set of 0, 90 degree nozzles and a cap for sealant with m20x2 thread. You may use common 28x3.1mm o-ring for better seal with sealant body (pun intended). v2 - updated thread
his wall-mounted caulk and sealant tube holder is designed to keep your workspace neat and organized. It features pre-made screw holes for easy and secure installation on any wall or workbench. Perfect for storing multiple tubes, it…
A small funnel for tire sealant especially for Presta valves (with thread)
A tapered spatula for smoothing sealant and caulk beads to a clean, professional finish. Print the default, or size it to your bead width free at marinelab3d.com . Print a whole set of profiles for a few cents. Print settings: TPU for…
Inspired by Remade for C4 Cartridges, Tr 25x3 Included FreeCAD files, use the .step in your slicer, slice with the top of the cap facing down, since the threads have 3mm pitch, 0.2mm is fine for layer height.
Marine sealants are expensive and dont come with caps because they consider them as a one time use. Save your sealants. Other caulking cap models won't work as the threads are too coarse. Its imperative to follow instructions precisely to…
The sealant cartridge nozzle cap at https://www.thingiverse.com/thing:3375441 is designed to be used with an o-ring. This is an alternative which can be printed in TPU Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
Simple design. No supports needed. Prints as a single piece. Mounts with just 1 (or 2) screws. Fits on Ender 3 bed. Print, mount, done. I know there are numerous mounts for caulk sealant tubes and I just couldn't find one that was a…
Wall hanger for sealant tubes and spray cans. I screwed mine to a 1x4" which i then attached to the wall.
A nozzle that fits Sika containers (not the regular silicone ones!) You can configure the nozzle length and diameter in the link below…
Silicone Sealant tube nozzle nozzle cleaner cap with FreeCAD (RT) file. I printed with 5 perimeter and with 0.16 layer height from PLA. Update 2023.12.28: WARNING : not printed and not tested… siloplast_v2.FCStd - can be loaded with stock…
This simple model allows for attractive silicone beads to be formed easily and without mess. This former currently produces straight beads (triangular cross section), which work really well and look good. I plan on adding radiused formers…
Sealant Grout Filler Scraper/Removal Tool A tool based on a similar commercially available sealant removal tool. It can help remove or scrap away silicon rubber sealant, caulk, grout and other fillers. Especially for silicon, you should…
Needed a sealant cap without o-ring. Seals by having in internal cone that wedges securely into the cut hole in the cartridge. Print with flat top down.
A Stand for Silicone Sealant/Caulk Tubes. I have tried several different brands and they did all fit, with varying amounts of snugness.\ There is both a flat stand, as well as a wall mountable backed version. Print Settings Printer Brand:…
Useful to keep opened cartridges (silicon, construction adhesive..). You'll need an o-ring (inner diameter: 20mm, diameter 3.55mm) to ensure a tight fit. I found mine in a parkside o-rings box. I printed my caps in PETG (0.2 layer height)…
A better nozzle to use with Green Glue sealant. The included nozzle doesn't thread well and tends to come loose.
Ich hasse es wenn die kurz benutze Silikon Kartusche beim nächsten Mal ausgetrocknet ist... Somit hier ein Verschluss. Damit es optimal dichtet einfach ein Gummiband vorab auf das Gewinde geben (muss aber nicht sein). Der Verschluss ist…
A minimalistic cap for standard silicone cartridge with S15 x 2.5 thread.
A printable knockoff of a sealant dipstick. Orange Seal used to make these, but don't appear to be on their website anymore. For use with bicycle tubeless systems to check how much sealant is still in the tire without having to dismount…
1) remove the old silicone 2) clean with, for example, isopropyl alcohol 3) apply silicone and wipe with an 8 mm squeegee in the direction of the slant (so that the silicone gets everywhere without air bubbles) 4) tear off the silicone…
4x4 silicone/sealant storage rack for storing 50mm OD tubes upright
A simple Sealant / Caulk Tube Rack for mouting Vertically on the side of a cabinet or Horizontally under a shelf. Holds 3 tubes. Mounts with M5 countersunk wood screws. Only existing designs I could find were abominations to 3d printing…
In need of some plastic scrapers to remove old gaskets from a motorcycle motor without damaging the mating surfaces, I didn't have any good options around. But, that's an easy problem to solve. I quickly drafted up four versions of a…
Sealant cartridge cap to conserve your opened cartridges. Fits standard cartridges. Beveled flange and corners for a tighter seal and easier grip. Print upside-down due to the bottom bevel (or sink it into the bed when slicing). Works…
Easily top up tubeless bicycle tires with sealant through the valve using these 3D printed funnels. No more spills or blocked syringes! I provide funnels for both Schrader and Presta valves. More info and Fusion and STEP files here.
The rubber sealant for the Deck Cable Outlet for 6, 8 & 10 mm cables. To be printed with TPU. Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.15 Filament: - TPU Notes: Print wide side down. The support ring included,…
Two sized nuts to seal the common caulking/sealant tubes used in building, renovation, DIY etc. They should stop the contents curing. I've found that disconnecting the applicator and allowing the sealant to cure in the applicator makes it…
To fill inner tube you must remove valve core.
I had found a nice tyre sealant applicator but it was missing the feature to place the sealant in side the tyre with out placing a lot around the treats of the valve. so I made one. there is 1 edition with a cap for storage and…
This sealing cap will close your sealing gun from air, so it will not dry out. I prefer PETG, so it then closes properly.
My builder needed an angled (45 degree) nozzle to apply sealant up into a roof capping. The thread is 25mm so a new nozzle was required.
zum Schutz vor ungewollter Entleerung. To protect from acidental discharge.
I made this design quickly, it's not perfect, but it did help me get out of a bit of a muddle in the workshop. I am providing the step so you are welcome to remix. Some advice: Use good PETG or stronger, I used some old stock and new, new…
Tool to clean the reminder of sealant from the tube's nozzle
