IKEA PAX Filament Spool Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Filament Rack fitting perfectly into an IKEA PAX System/Waredrobe. Only uses IKEA and Printed parts.
- Ocena
- 4,9 / 5
- Polubienia
- 79
- Pobrania
- 259
- Wydruki
- 10
- Wyświetlenia
- 5627
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Overview
A filament storage System I designed to have easy access and a great overview of my filament, while having it neatly stored in my existing PAX.
Stores about 33 Spools, depending on their size.
Materials
Uses 6 KOMPLEMENT Clothes rails, optionally only 2 or 4 can be used, but fewer filament can be stored.
If you want to save rails, you can decide to only use 1 per row, using the next row/backplate as support, but I prefer using 2 (also increases stability a bit).
Your Size, Color and Country may vary, so its best to find them yourself, but here are the ones I used: https://www.ikea.com/at/de/p/komplement-kleiderstange-dunkelgrau-80256940/#content
It is designed for deep (58cm) PAX. the with does not matter as long as you have fitting rails. I use the 100cm version.
I never filled all screw holes with screws, I think that would be overkill, but of course you can.
Print Settings
The 2 Big Parts (Left & Right) are split into 2x4 heatbed-size parts. The small parts can be glued together, but usually the fit together nicely, so it's not necessary.
I used PLA and a 0.35mm Layer Hight, but it is not really critical. You can also reduce infill to reduce the amount of filament and printing time.
Updates
21.01.2024 - fixed issue with screw holes.