POSITIVE GRID SPARK MINI PICK/PLECTRUM STORAGE BOX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A STORAGE BOX STYLED AFTER THE POSITIVE GRID SPARK MINI GUITAR AMP. STORE YOUR PICKS INSIDE.
- Ocena
- 0 / 5
- Polubienia
- 0
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Standard Digital File License
I hope you enjoy this Positive Grid Spark Mini Amp Storage Box. Styled and modelled after the Spark Mini itself, this little box lets you store your plectrums/picks neatly inside, with extra slots in the top lid that hold picks up to 1.2 mm thick.
Installation: Some parts are small, so assembly can be a little fiddly — but totally achievable if you take your time. Please check the installation video for a clear walkthrough.
Magnets (Optional) The design uses 6×3 mm magnets, but they’re not required. The lid will still close securely without them.
Adhesive Recommendation: I used Gorilla Contact Adhesive to attach the parts. It dries clear, is easy to clean up, and doesn’t leave residue like superglue.
Printing the Grill The grill can be printed flat in a single colour, or you can add a colour change for a two‑tone effect. I printed mine with a black base and gold top texture, similar to the real Spark Mini grill.
Printing the logo: Same as above
Other Print settings.
Infil can be set as you wish. Mine was 15% gyroid
Small parts can be printed with a brim, but not always required if the first layers are slow and you have good adhesion.
If you have any issues, need adjustments, or want guidance on assembly, please reach out — I’m always happy to help.
Thank you for purchasing my product.
Dan @ DT3D_PRINT