Headphone Stand – One-Piece and A1 Mini Two-Piece Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stable headphone stand in one- and two-piece versions for large and compact 3D printers.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Standard Digital File License
This functional headphone stand provides a dedicated place for storing over-ear headphones and gaming headsets on a desk, shelf, or sideboard.
The model was designed with a stable footprint, a broad headphone rest, and a compact overall size. It is available in two construction variants so the design can be printed on both larger and smaller machines.
Included variants:
• One-piece version for printers with sufficient build volume
• Two-piece version for compact printers such as the Bambu Lab A1 Mini
The two-piece version requires a suitable adhesive after printing. No screws or additional assembly hardware are needed.
Approximate dimensions:
• Width: 19 cm
• Height: 21 cm
• Depth: 15 cm
• Headphone rest: 4.8 × 3 cm
The stand was tested with a Sennheiser headphone. An informal stability check with an approximately 2 kg load was also completed, but this is not a certified load rating. The model is intended exclusively for storing headphones.
Post a Make if you print it, and share any feedback or improvement ideas.