1 / 5
16 mm Carbon Fiber Tube FPV Motor Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Motor mount for a DIY FPV quadcopter frame using 16 mm carbon fiber tubes, with two clamp options
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
This is a motor mount for a DIY FPV quadcopter frame built with 16 mm carbon fiber tubes.
The motor mounting dimensions are shown in the drawing. The design has two versions: one fully 3D printed version with a printed top cap fixed by 4 bolts, and another version with a printed motor mount base and aluminum clamps on top.
M3 heat-set inserts are used in the lower part of the mount. Recommended materials are PA6 or PLA-CF.