1 / 5
16 mm Carbon Fiber Tube FPV Motor Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Motor mount for a DIY FPV quadcopter frame using 16 mm carbon fiber tubes, with two clamp options
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
This is a motor mount for a DIY FPV quadcopter frame built with 16 mm carbon fiber tubes.
The motor mounting dimensions are shown in the drawing. The design has two versions: one fully 3D printed version with a printed top cap fixed by 4 bolts, and another version with a printed motor mount base and aluminum clamps on top.
M3 heat-set inserts are used in the lower part of the mount. Recommended materials are PA6 or PLA-CF.