Scalable Self-watering Planter Insert with Optional Funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A self-watering planter that you can scale to a pot and prints without supports. Has an optional funnel for easy filling
- Ocena
- 5 / 5
- Polubienia
- 209
- Pobrania
- 591
- Wydruki
- 11
- Wyświetlenia
- 4045
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Scalable Design
I designed this 5" self-watering planter insert to easily be scaled up and down for different pot types. Simply measure your pot diameter and set the dimensions in your slicer. The design is 5"x5"x5" which makes it easy to print on a Prusa Mini.
Optional Leaf Funnel:
I wanted a way to fill the planter easily and give it a little style. There is also a simple style funnel if you prefer a more basic design. The leaf funnel prints without supports by printing at an angle. You shouldn't have to adjust anything in your slicer as the model has already been setup for it.
Print Suggestions:
I have printed .2mm and .3mm layer height with success on speed settings for the insert and .15mm for the leaf using PLA. 15-20% infill works fine but shouldn't need any infill depending on how large you scale this or how thick your perimeter walls are. The 5" design uses 1.5mm walls print without supports.
Scaling the Insert:
You can also split the design on the Z axis or stop the print at a desired height if you don't want to print as high. The angled walls are 25 degrees so if you wanted to scale the Z axis down a little this shouldn't cause too much problem with overhang issues.
To scale the optional funnels:
scale the X and Y equal on the insert while the Z axis doesn't matter. Take the scale percentage of the insert and apply that to the X,Y and Z of the funnel for it to fit.
Support the project or show your appreciation at https://ko-fi.com/Joshed3D