Waveshare e-ink ESP32 S3 PhotoPainter frame

This is for the waveshare esp32 S3 photopainter e-ink (color) with a screen that measures, in total, 190mm by 130mm.

Printed with PETG. Fits on a standard printer bed, as long as you don't use a brim. 

Pennies and dimes fit in the 5 slots around the edges of the frame to keep everything in place. 

Settings used in OrcaSlicer on Elegoo Neptune 4 Pro with SUNLU PETG:

• Quality

  • Ironing type: No ironing

• Strength

  • Wall loops: 3

  • Top / bottom shell layers: 4

  • Sparse infill density: 10%

  • Sparse infill pattern: Gyroid

• Speed

  • First layer: 25mm/s

  • First layer infill: 45mm/s

  • Outer wall: 80mm/s

  • Inner wall: 150mm/s

• Others

  • Brim type: Inner brim only

  • Brim width: 3mm

Print time is approx 3 hr 5 min and uses approx 92g of filament