Waveshare e-ink ESP32 S3 PhotoPainter frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A better looking frame for a Waveshare ESP32-S3-PhotoPainter color e-ink display.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 6
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
This is for the waveshare esp32 S3 photopainter e-ink (color) with a screen that measures, in total, 190mm by 130mm.
Printed with PETG. Fits on a standard printer bed, as long as you don't use a brim.
Pennies and dimes fit in the 5 slots around the edges of the frame to keep everything in place.
Settings used in OrcaSlicer on Elegoo Neptune 4 Pro with SUNLU PETG:
Quality
Ironing type: No ironing
Strength
Wall loops: 3
Top / bottom shell layers: 4
Sparse infill density: 10%
Sparse infill pattern: Gyroid
Speed
First layer: 25mm/s
First layer infill: 45mm/s
Outer wall: 80mm/s
Inner wall: 150mm/s
Others
Brim type: Inner brim only
Brim width: 3mm
Print time is approx 3 hr 5 min and uses approx 92g of filament