Daytona Floor Jack Handle Holder 1.5 ton Aluminum
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is to wall mount a Daytona 1.5 Ton Aluminum Floor Jack Handle.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is to complement a floor jack wall mount I printed designed by Manning the Printer. This is specifically designed for the Harbor Freight Daytona 1.5 Ton Professional Racing Series Aluminum Floor Jack.
Was originally leaning it up against the wall but decided to wall mount it as well. This may work with other Daytona floor jack handles, I just don't have any others to test. PLA is likely fine since the handle is fairly light. If your garage gets hot you might want to do PETG. I personally used ASA.
Print it face up, no supports should be needed. The triangle cutouts are to reduce unnecessary material without needing supports. Holes are sized for #10 screws.