WiFi Extender With ESP32S3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Small ESP32-S3 Project A WiFi Extender with a Web Interface
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A Small ESP32-S3 Project
A WiFi Extender with a Web Interface
Upon first use, the Access Point (AP) is unconfigured.
You must set it up using a smartphone or laptop. Look for the SSID "myRepeater-Setup" and connect to it using the password "setup1234".
Then, use a web browser to access the interface at http://192.168.100.1
The password is "@dmin1234"
Scan for existing WiFi networks and connect to one.
The repeater will create the same SSID with "_ext" appended
the password will be the same as that of the source SSID.
Pressing and holding the "Boot" button for 10 seconds completely wipes the ESP32's settings.
Petit Projet avec un ESP32S3
Un Extender WiFi avec interface WEB
à la premiére utilisation l'AP est vide. Il faut le paramétrer avec un Smartphone ou un Laptop..
Dans les SSID on verra "myRepeater-Setup", on s'y connecte avec le mot de passe "setup1234".
Ensuite on utilise un navigateur pour accéder à l'interface WEB http://192.168.100.1
le mot de passe est "@dmin1234"
On scan les réseaux WiFi existants on s'y connecte.
Le repéteur créera le même SSID avec "_ext", le mot de passe est le même que le SSID source.
Un appui de 10 secondes sur le bouton boot efface complétement les paramétrages de l'ESP32