FIXED 3D60S - Modular, 3D Printed Xbox 360 Slim Shell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FIXED Fully modular, no solder needed 3D printable shell for the Xbox 360 Slim!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Fully modular, no solder needed 3D printable shell for the Xbox 360 Slim edited to fix the file issue(please read below for details).
This is a re upload of the 3D60S project by Michael Murray. The issue with the original model was that the rear mounting bracket had 2 files. Rear-Panel.stl and Rear-Panel-Wifi.stl. The problem was that both files were the wifi version with the holes to mount the Phat Wifi module. Some people might not want that so I edited the file in order to fix that. Only the fixed file can be found in this model post so please go ahead and grab all the original files from the og post please to show your support to him ;)
Note: Michael, if you see this and fix the model issue I will happily remove this post!