Digitenna Reinforced Crank (Stronger Replacement)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For radio amateurs who have built the modified Digitenna. This is a stronger, more durable replacement crank.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This improved crank features a thicker pivot pin for increased strength.
For maximum durability, I recommend printing it with 100% infill. Since this is a small part, the extra material and print time are negligible.
Three versions are included:
Countersunk (flat head) screw version for M3 and M2.5 screws – provides a flush, smooth surface.
Pan head screw version – easier to source in some regions.
The two flat head versions use M3 × 16 mm and M2.5 x 16 mm screws. You can find these at amazon.
The third photo (yellow prints) shows the original design next to the updated version.