Leaf Shaped Wall Hanger for Vines
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple wall hanger in the shape of a leaf to help get vines from hanging so low.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Public Domain
A friend wanted to get the vines of his plant off the ground and higher up. The stem is heated using a hot air station and bent using a round mold. The particular model shown was printed with a 0.6 mm nozzle in Protopasta's Chlorophylled Thermochromatic Filament.
The model with the holes is meant for green pushpins to sit flush and then hang on the wall. The push pins can be found on Amazon. I have included the Step files so anyone can use their favorite CAD flavor to do whatever they wish with the model. The model with no holes was meant to be used with double sided tape.