Leaf Shaped Wall Hanger for Vines
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple wall hanger in the shape of a leaf to help get vines from hanging so low.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Public Domain
A friend wanted to get the vines of his plant off the ground and higher up. The stem is heated using a hot air station and bent using a round mold. The particular model shown was printed with a 0.6 mm nozzle in Protopasta's Chlorophylled Thermochromatic Filament.
The model with the holes is meant for green pushpins to sit flush and then hang on the wall. The push pins can be found on Amazon. I have included the Step files so anyone can use their favorite CAD flavor to do whatever they wish with the model. The model with no holes was meant to be used with double sided tape.