PET Bottle Finish(Thread) Size Converter (30mm to 28mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this for "Small Garden Care is really fun" model. But you can modify size or type for your needs.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 340
- Wydruki
- 3
- Wyświetlenia
- 2032
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
How it was born
One day, I'm looking around the Printables world. And I found a fun and practical model: https://www.printables.com/model/89488-small-garden-care-is-really-fun
I printed it and tried to connect with 2L size of water bottle. Unfortunately, the thread didn't fit.
Fix the problem
I did a lot of research on bottle threads and found that most drinks use SP400/SP410/SP415 Standard. The "Small Garden Care is really fun" is also compatible with SP410.
I couldn't find the exact spec for the water bottle I used, but it starts with 3 threads as shown in the attached picture, and it seems to be a thread with a pitch of 9mm.
Remix as your needs
I uploaded a source file (sldprt for Solidworks), modify it to adjust the size and type as you want.