1 / 7
Rocket ship from soviet film Cosmic Journey shown in 1936. — zdjęcie 1
1 / 7

Rocket ship from soviet film Cosmic Journey shown in 1936.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rocket ship from soviet film Cosmic Journey shown in 1936.

Ocena
0 / 5
Polubienia
5
Pobrania
13
Wydruki
0
Wyświetlenia
80
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is my interpretations of the rocket ship from soviet film Cosmic Journey shown in 1936.

Konstantin Tsiolkovsky was a consultant on the film and the rocket design is an evolution of Tsiolkovsy’s earlier sketches. The design also appears to be influenced by the rocket ship in Frau im Mond.

This is a rough approximation of the original. The only materials for the design are a few scenes from the film and Tsiolkovsky’s sketches. It appears that 3 very different models were used in the film. The views of the combined stages shown before the launch don’t show any obvious demarcation of the two stages and seems to be one single rocket. There are a few frames showing the stage separation where the bottom stage after separation looks the same as the complete rocket immediately before separation, and a few shots of the second stage. For the second stage I started with Tsiolkovsky’s 1912 sketch and shortened it to approximately the proportions shown in the film. I then added fins, portholes and the doors. I made the 1st stage to continue back from the second stage. I also took the liberty of changing the name of the ship to the Konstantin Tsiolkovsky. The text on the ship was made by printing onto clear decal paper and then applying the decals to the model. I have included a PDF file with the decals I used.

The film is available on youtube. Many of Tsiolkovsky’s works, including some technical papers, are available as English translations and in their original Russian as well as several other languages here: https://www.tsiolkovsky.org/en/cosmic-philosophy-by-tsiolkovsky/

Overall length is 350 mm (136.78in)

Printing:

Both stl files and .3mf project files are included. The project files include supports and cuts.

Everything was printed in silver PLA with a 0.4 nozzle and 0.2 layer height.

Second stage: Print oriented up. Supports are required under the flat surface at the bottom of the nozzle and vanes as well as part way up the fins.

First stage: this part will not fit on a Prusa Mk3/3.5/4 print bed. I split the model using the slicer and placed the cuts for both parts on the print bed. I glued them together after printing. Good alignment is important.

The text on the ship was made by printing onto clear decal paper and then applying the decals to the model. I have included a PDF file with the decals I used. You will need to use a decal paper that is appropriate for the type of printer you have.

Display stand: The rails will fit on the print bed diagonally. 2 rails will need to be printed. I split the base using the slicer. I made the connector holes to be 1.8 mm in diameter so that I could use pieces of filament cut to 9 mm to join the halves instead of printing connectors. I printed 6 of the sled pieces and glued them in place as shown.

Tagi