Tribit Labs Ultimate Modular Storage System (TLUMDS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
27 different sized Drawers, 2 versions ranging from 63mmx63mmx42 to 189x189x129. Multiple Mounting options available.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
First of off, Thanks for taking the time to read this. This is actually the first complete project I've ever published and my first time using fusion 360. With that in mind I bring you a whole modular drawer system designed with the number 63 in mind. Multiple Mounting Options, 20x20 rail, 30x30 rails, IAC Rails, and more to come Before 7/22/2026. I used PETG with a 4mm nozzle, .42 layer height and had a great time printing this.
!!! FOR BEST RESULTS Always Print Keys, Drawers, and Shells, vertical !!!
Features:
-Fancy Fluted Drawers For those who want class, Use the same Shell caps in the v2 files.
-Regular set for those who just want functionality
27 Different Sizes from 63mmx63mmx42 to 189x189x129.
-Drawer stopper to prevent the drawer from falling out. Very easy to remove as well.
-20x20-30x30 to Butterfly Key Adaptors
-IAC T-Slot to Butterfly Key Adaptor .
-Basic Butterfly key adapters and Trims for Desk mounted versions.
-Buildable Butterfly Keys Peg Variant Toolless and 3m screw variant. The peg may require some taps from a hard block to get it to snap in, I prefer it this way because it ultimately adds strength to the system when its in place.
-Buildable Butterfly Key Tops and Bottoms for Lateral Support. Allows you to build the drawers in rows outwards.
-Drawer Caps Have a Center and Top, The Top Cap is for the Buildable Top butterfly key and the Center Cap is for any drawers that are not going to be place on the top of the system. They will snap together. Use a bit of force, they are designed to be robust.
-Tool Free Core Design, Sitting on a surface no tools or glue is required. When you want to start mounting these to something Id suggest using the 3m screw variants, or stacking larger boxes at the bottom to smaller boxes on the Mounting adaptors.
-Load Tested in 5lb increments. They can each easily manage 10lbs, and the build actually gets stronger the more you secure them to each other. The bigger 189x189x126 Drawer setup was able to handle 20 lbs easily. I was using the 3m screw variant for this particular test.
-Built with Expansion in mind. I have settled on the Shells, the top caps and the center caps. As they are the core of this build. The entire future ecosystem of this project will be designed around those.