1 / 6
Small Box With Magnetic Closing — zdjęcie 1
1 / 6

Small Box With Magnetic Closing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small box I designed for my custom hobby knife insert.

Ocena
0 / 5
Polubienia
5
Pobrania
14
Wydruki
0
Wyświetlenia
114
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Small custom made box for my Hobby Knife Holder/Box Insert. I designed it exclusively to fit my insert but of course you can use it for whatever you want. Printed at 0.24mm layer height with a 0.4mm nozzle and it comes out functional, lower the layer height and of course you get a cleaner print, but for me it wasn't needed. 

Dimensions:
Inner Width: 152.8mm
Inner Depth: 51.2mm
Inner Height: 11mm (15.5mm max height with lid)

Outer Width: 156.8mm
Outer Depth: 60.2mm
Outer Height: 22mm (with lid)

It uses 4x 2mm x 4mm magnets as the lid "latch". For my printer and magnets I oversized the holes by 0.1mm and its a perfect fit. I probably could have got away without glue, but I still put a drop in each hole just for extra security.

I used a spare piece of PETG I had from a filament change as the hinge pivot, it works well although it isn't the smoothest thing I've ever touched. Put a drop of CA glue on each edge of the hinge one your filament is in there to lock it in place.

Thanks for checking out my model and happy printing! 

*The corners on the bottom half look a bit janky because my PA settings got reset somehow, but with a properly calibrated printer you won't see that, as you can see by the top half looking nice and clean after I caught the issue.

Tagi