1 / 45
ExoBass - Wing Sets - Bass of Spades — zdjęcie 1
1 / 45

ExoBass - Wing Sets - Bass of Spades

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D printed bass part — full catalog, build planner, and assembly guides at https://exobass.com

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
39
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Part of the ExoBass project — full catalog, build planner, and assembly guides at https://exobass.com

Plan Your Build & Get Hardware

ExoBass can be confusing! Head over to our build planner to plan your entire build - it'll walk you through every available part and handle compatibility along the way, and it covers all ExoBass parts. It's also the best way to get hardware, since it lets you buy everything for a full build in one go, not just this part.

You can find this specific part, ExoBass - Wing Sets - Bass of Spades, on our site.

Step 1: Install Heat Set Inserts

Step 2: Glue body together

Assemble the base

Using glue and a mallet, Put the swirls into the base.

Using glue and a mallet, Insert the diagonal pins to connect all of the pieces to each other.

Step 3: Attach to 2020

Step 4: Control Panel

Step 5: Strap Mounts

Hardware

DIY Kit

You can order a DIY kit for your entire build from our build planner, the estimate for this part's kit is $8.57 plus shipping.

Self Source

If you want to order the parts yourself, here's a list. Estimated cost: $75.06.

Tagi