Magnetic Tool Retainer for Peak Design Tripod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic retainer for the Peak Design tripod Allen key tool, improving retention while keeping it easy to access.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This attachment fits over the original Allen key holder on a Peak Design tripod and uses 5 8x2mm magnets to improve tool retention.
The stock tool can slip out of its holder and costs around $40 to replace. This design helps keep it secure during normal use, storage, and transportation while also providing a quick magnetic docking point when making frequent adjustments.
The retainer snaps nicely onto the stock tool holder, although a dot of super glue can be added for extra security. I'm running mine without glue for now.
The tool may still come loose under extreme impacts or if the tripod is allowed to roll around inside a vehicle, but retention is significantly better than the original design. Is it perfect, no. Is it better than the original, yes.
Confirm magnet polarity before installation. I was able to glue the 3 magnets into place fairly easily as they snap snug into the holes, then used a scrap print and rubber band to secure the opposite walls magnets / keep them from flying out.
I printed at a layer height of ".15 Quality" on my Prusa Mk4 and it came out perfect. Oriented with the 3-magnet side facing upwards.
If you would like my Fusion 3D file for creating your own versions, shoot me a message. It's messy but I'm willing to share.