Asus Radeon RX6600 Dual 8GB 80mm fan adapter.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
80mm fan adapter to replace the original cooler fans.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Had a cooler fan fail on my Asus Radeon RX6600 card. As i had the parts necessary, i decided to make an adapter that would fit into the original frame.
Important!: This will make the cooler approx. 32mm taller!
Additional parts needed:
8x 3,7mm screws with low profile heads. Hole depth is 11,5mm
8x M4x10mm screw
8x 4x5x6mm threaded inserts
5-pin cable splitter for the fans.
Printing info:
Filament: PETG
Layer hight: 0.2mm
Infill: 15%
Perimeters: 4
Print the adapter with the fan mounting holes down.
Create a mirror instance of the fan adapter for fan nr 2. (The angle of the mounting point for fan nr. 2 was not completely identical to nr 1, so the adapter will be slightly asymmetrical to the other.)
Info on mounting:
Use original screws to attach the adapter to the frame.
The fan cable splitter must be spliced to the original wire harness. See attached photo for pin-out.
See photos and ask if you need more info.