Asus Radeon RX6600 Dual 8GB 80mm fan adapter.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
80mm fan adapter to replace the original cooler fans.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Had a cooler fan fail on my Asus Radeon RX6600 card. As i had the parts necessary, i decided to make an adapter that would fit into the original frame.
Important!: This will make the cooler approx. 32mm taller!
Additional parts needed:
8x 3,7mm screws with low profile heads. Hole depth is 11,5mm
8x M4x10mm screw
8x 4x5x6mm threaded inserts
5-pin cable splitter for the fans.
Printing info:
Filament: PETG
Layer hight: 0.2mm
Infill: 15%
Perimeters: 4
Print the adapter with the fan mounting holes down.
Create a mirror instance of the fan adapter for fan nr 2. (The angle of the mounting point for fan nr. 2 was not completely identical to nr 1, so the adapter will be slightly asymmetrical to the other.)
Info on mounting:
Use original screws to attach the adapter to the frame.
The fan cable splitter must be spliced to the original wire harness. See attached photo for pin-out.
See photos and ask if you need more info.