1 / 3
Emergence of the Dark Knight — zdjęcie 1
1 / 3

Emergence of the Dark Knight

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wall Bust & Comic Bookend

Ocena
0 / 5
Polubienia
6
Pobrania
19
Wydruki
0
Wyświetlenia
70
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Bring the legendary Protector of Gotham straight to your walls or bookshelf with this high-quality 3D printable model. Featuring a powerful dynamic pose breaking through a concrete texture, its flat-back geometry makes it an incredible piece of wall art or a heavy-duty comic book anchor.

The back features a clean, debossed emblem for a premium look from any angle.

🛠 Printing Recommendations

  • Resin (SLA/DLP): Best for maximum detail on the cowl lines and sharp stone fractures.

  • Filament (FDM): Highly printable. Use a fine layer height (0.12-0.16 mm).

  • Infill: 10-15%. Tip: If using as a bookend, increase infill at the base or add internal weights during the print for extra stability.

  • Supports: Minimal supports needed under the extending arm and cowl tips.

💡 Finishing Tip: Print in matte gray or charcoal. Lightly dry-brush the fractured concrete edges with white acrylic paint to instantly make the stone texture pop!

Tagi