Desiccant holder for USS drybox with microscope slide window
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desiccant holder for the Prusa USS drybox that uses a microscope slide as a window so you can see the color indicator.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 20
- Wydruki
- 3
- Wyświetlenia
- 198
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This desiccant holder for the USS drybox has a window for a standard microscope slide on one side so that you can see the color indicator of the desiccant beads from outside the drybox. Due to the coloration of the drybox plastic, it's still a bit hard to see, but better than nothing. The desiccant holder can be removed through the side hatch.
Note that unlike the official desiccant holder, this holder does not have a tapered top/bottom. I'm not sure why the official holder has this, but I suspect some especially large filament roles may not fit with this holder. Unfortunately it is impossible to fit the microscope slide with a tapered end.
I print with PLA, 0.4mm nozzle, 0.25mm layer height.