1 / 1
41mm/16pt Wrench for Shimano SM-BBR60 Bottom Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wrench sized for 41mm bottom brackets with 16 indents, specifically the Shimano SM-BBR60
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a wrench sized for 41mm bottom brackets with 16 indents, specifically the Shimano SM-BBR60.
It has a 1/2" square drive boss for use with a torque wrench (Always use at 90 degrees to the handle of the torque wrench to maintain accuracy)
I used PLA on my old Ender 3 and it just about tightened both sides of the BB before stripping the teeth off. A stronger material would likely work well.