IKEA RODRET 1-gang mounting plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to mount the IKEA RODRET wall mount into a US 1-gang box.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's not pretty but it gets the job done.
Hardware
2x M4x6 screws (The total depth is just under 8mm, so you could use M4x8 if there's a box behind the hole or if you add a single washer
2x 6-32 UNC screws that came with the light switch cover. If there's no box behind the plate (for example if you installed a 3-gang cover over a 2-gang box), you'll need to trim the screws so that they don't punch the drywall behind them. Simply screw in the screws in the 3d-printed part without the cover, and run a hacksaw along the part. The screw will get very hot, so try not to move it when cutting such that you don't remove the plastic threads.