IKEA RODRET 1-gang mounting plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows you to mount the IKEA RODRET wall mount into a US 1-gang box.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It's not pretty but it gets the job done.
Hardware
2x M4x6 screws (The total depth is just under 8mm, so you could use M4x8 if there's a box behind the hole or if you add a single washer
2x 6-32 UNC screws that came with the light switch cover. If there's no box behind the plate (for example if you installed a 3-gang cover over a 2-gang box), you'll need to trim the screws so that they don't punch the drywall behind them. Simply screw in the screws in the 3d-printed part without the cover, and run a hacksaw along the part. The screw will get very hot, so try not to move it when cutting such that you don't remove the plastic threads.