1 / 5
Sovol SH03 Filament Dryer Desiccant Box — zdjęcie 1
1 / 5

Sovol SH03 Filament Dryer Desiccant Box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dessicant box for Sovol SH03 filament dryer. Box fits in the compartment built in to the dryer.

Ocena
5 / 5
Polubienia
14
Pobrania
125
Wydruki
1
Wyświetlenia
534
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Public Domain

The Sovol SH03 filament dryer is a 4 spool dryer with 2 independent chambers.

Each chamber has a compartment on the bottom to hold desiccant bags.

I wanted to use loose pellets so I made this box which fits precisely in the compartment.

The 2 chamber compartments for some reason only known to Sovol have different locations for the side guide slots. This box and cover are designed symmetrically to be able to fit into both compartments. 

For each chamber you need to print 1 box and 1 cover (included files) so 2x box + 2x cover for the dryer.

You should use temperature resistant material since the dryer can heat up to 85 degrees C.

I used Prusament PC-CF and used the Core One 0.20mm Structural profile with 25% gyroid infill. No supports needed if you lay parts flat as they are in the files.