1 / 5
Sovol SH03 Filament Dryer Desiccant Box — image 1
1 / 5

Sovol SH03 Filament Dryer Desiccant Box

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Dessicant box for Sovol SH03 filament dryer. Box fits in the compartment built in to the dryer.

Rating
5 / 5
Likes
14
Downloads
125
Makes
1
Views
534
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Public Domain

The Sovol SH03 filament dryer is a 4 spool dryer with 2 independent chambers.

Each chamber has a compartment on the bottom to hold desiccant bags.

I wanted to use loose pellets so I made this box which fits precisely in the compartment.

The 2 chamber compartments for some reason only known to Sovol have different locations for the side guide slots. This box and cover are designed symmetrically to be able to fit into both compartments. 

For each chamber you need to print 1 box and 1 cover (included files) so 2x box + 2x cover for the dryer.

You should use temperature resistant material since the dryer can heat up to 85 degrees C.

I used Prusament PC-CF and used the Core One 0.20mm Structural profile with 25% gyroid infill. No supports needed if you lay parts flat as they are in the files.