Slingshot Cyclops v1.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a slingshot, you'll shoot your eye out!
- Ocena
- 4,5 / 5
- Polubienia
- 72
- Pobrania
- 512
- Wydruki
- 2
- Wyświetlenia
- 4028
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
You attach the bands by pushing a looped end into the slot from the side and locking it with a piece of filament through the center of the loop.
Print in 0.15mm with 5 perimeters and 13 top/bottom layers.
I used different infill percentages for the different parts of the slingshot but it's up to you.
You need those 5 perimeters if you want to sand it after printing which I HIGHLY recommend!
If you like you can print two eyes in TPU and push them into the hole from both sides.
The opening in the eye is designed to hold a 8mm steel ball.
Here's a tutorial for attaching rolled up bands:
Revisions:
1.1
- Bigger band hole for normal 1.75mm filament lock.
- Optimized geometry for finger grooves.