Slingshot Cyclops v1.1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a slingshot, you'll shoot your eye out!
- Rating
- 4.5 / 5
- Likes
- 72
- Downloads
- 512
- Makes
- 2
- Views
- 4,028
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
You attach the bands by pushing a looped end into the slot from the side and locking it with a piece of filament through the center of the loop.
Print in 0.15mm with 5 perimeters and 13 top/bottom layers.
I used different infill percentages for the different parts of the slingshot but it's up to you.
You need those 5 perimeters if you want to sand it after printing which I HIGHLY recommend!
If you like you can print two eyes in TPU and push them into the hole from both sides.
The opening in the eye is designed to hold a 8mm steel ball.
Here's a tutorial for attaching rolled up bands:
Revisions:
1.1
- Bigger band hole for normal 1.75mm filament lock.
- Optimized geometry for finger grooves.