1 / 11
RobotVacuum ramp for Saferoom door — zdjęcie 1
1 / 11

RobotVacuum ramp for Saferoom door

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Robot vacuum ramp for my room's safe-room door (Mamad). 2.2 cm high with a 10° incline.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
71
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Robot Vacuum Ramp – 2.2 cm Threshold (10° Incline)

My robot vacuum kept stopping at my room's door, which meant my room was always the one that stayed dirty.

It was finally time to do something about it.

So I designed this modular ramp specifically to solve that problem.

This is a 3D-printable ramp designed for a 2.2 cm (22 mm) door threshold with a 10° incline, making it much easier for a robot vacuum to climb over the threshold.

The ramp features a modular design and is divided into 10 cm-wide sections that connect using puzzle-style interlocking joints. This lets you print only as many sections as you need for your doorway while also making the model compatible with smaller print beds.

The model was designed in Autodesk Fusion. The textured surface was created using Bump Mesh, an open-source tool developed by the community and led by Stefan from the CNC Kitchen YouTube channel.

It was specifically designed and tested with a Roborock S8 robot vacuum and printed on a Bambu Lab A1 Mini. Although it was optimized for the Roborock S8, it should also work with other robot vacuums that have similar wheel sizes and climbing capabilities.

One of my design goals was strength. This ramp is designed to be extremely rigid and durable—not only can a robot vacuum drive over it countless times, but it's also strong enough to be stepped on by an adult during everyday use without any issues.

Recommended Print Settings

Material: PETG (recommended for its excellent dimensional accuracy and long-term durability)

Nozzle: 0.4 mm

Layer Height: 0.20 mm

Wall Loops: 3 or more

Infill: 15% (Grid)

Supports: Required

Brim: Not required

Print Statistics

Using the recommended settings above:

Printer: Bambu Lab A1 Mini

Print Time: Approximately 2 hours 33 minutes

Model Filament: 58.47 g (19.14 m)

Total Filament Used: 60.55 g (19.82 m)

License

This model is released under the Creative Commons Attribution–NonCommercial–ShareAlike 4.0 International (CC BY-NC-SA 4.0) license.

You are welcome to download, print, modify, and share this model. However, commercial use is not permitted, including selling the digital files or printed copies, without my explicit permission. If you create a remix or improvement, it must also be shared under the same license.

I'd love to see any improvements or remixes you make!

Feedback

If this model helped you, please consider leaving a like, posting a Make, or sharing your feedback. It really helps and motivates me to keep designing and sharing more models with the community.

Happy printing! 🚀

Tagi