Shelter Animal Feeding Station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In our local animal shelter, we use small food baskets and tongue depressors to dish out kitty snacks.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Background
This organizer is designed to hold 1 lb food trays and 6" tongue depressors in the main organizer. The side add-on is designed to hold can lid covers, and the back add-on can be used for can openers or Chuchuru! The dimensions of the compartments is the following:
Main Basket: 4 ⅝" x 3 ¼" x ⅝"
Side: 1 ½" x 4 ¼" x 1 ½"
Back: 4 ½" x 2" x 3"
Materials
These were printed using Overture PLA, but any rigid filament will work!
Print Settings
Setting | Value |
|---|---|
Layer Height | 0.1mm |
Perimeter | 3 |
Infill | 15% |
Supports | Build Plate Only |
Instructions
Place the models onto your build plate, and follow the recommended print settings. After the model has been printed, simply remove the supports and it's done!