Shelter Animal Feeding Station
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
In our local animal shelter, we use small food baskets and tongue depressors to dish out kitty snacks.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 2
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Background
This organizer is designed to hold 1 lb food trays and 6" tongue depressors in the main organizer. The side add-on is designed to hold can lid covers, and the back add-on can be used for can openers or Chuchuru! The dimensions of the compartments is the following:
Main Basket: 4 ⅝" x 3 ¼" x ⅝"
Side: 1 ½" x 4 ¼" x 1 ½"
Back: 4 ½" x 2" x 3"
Materials
These were printed using Overture PLA, but any rigid filament will work!
Print Settings
Setting | Value |
|---|---|
Layer Height | 0.1mm |
Perimeter | 3 |
Infill | 15% |
Supports | Build Plate Only |
Instructions
Place the models onto your build plate, and follow the recommended print settings. After the model has been printed, simply remove the supports and it's done!