Dart Zone Vector Pro Battery Doors with and without Electronics
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dart Zone Vector Pro Battery Doors with and without Electronics
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description:
A few battery doors for the Dart Zone Vector Pro, including one with cutouts for a battery indicator and switch. Do any wiring completely at your own risk.
Materials:
Retention Screw - I prefer a metal thumb screw. Nightingales work fine.
Optional, for the voltage indicator door:
Switch - Most of the switches in my box fit fine, but I used a SS12F15G3.
Battery Indicator - Anything with a screen 20mmx31mm should fit. I used a Haldzemo HZ007.
18awg Wire
Male XT30 Connector
Female XT30 Connector
Heat Shrink
RTV Silicone
Printing Instructions:
Use supports necessary. I recommend PETG with 5 walls and 2% gyroid infill, but PLA should be fine.