Dart Zone Vector Pro Battery Doors with and without Electronics
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dart Zone Vector Pro Battery Doors with and without Electronics
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 4
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description:
A few battery doors for the Dart Zone Vector Pro, including one with cutouts for a battery indicator and switch. Do any wiring completely at your own risk.
Materials:
Retention Screw - I prefer a metal thumb screw. Nightingales work fine.
Optional, for the voltage indicator door:
Switch - Most of the switches in my box fit fine, but I used a SS12F15G3.
Battery Indicator - Anything with a screen 20mmx31mm should fit. I used a Haldzemo HZ007.
18awg Wire
Male XT30 Connector
Female XT30 Connector
Heat Shrink
RTV Silicone
Printing Instructions:
Use supports necessary. I recommend PETG with 5 walls and 2% gyroid infill, but PLA should be fine.