1 / 6
Flat Mesh Skirts Voron 2.4 remade in CAD 250,300,350mm — zdjęcie 1
1 / 6

Flat Mesh Skirts Voron 2.4 remade in CAD 250,300,350mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I remade the flat mesh skirts for the 2.4 in Fusion.

Ocena
0 / 5
Polubienia
10
Pobrania
28
Wydruki
0
Wyświetlenia
167
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

I wanted to modify the side skirts of the flat mesh skirts and decided to go all in with the remake in Fusion.

@Thejiral made these in FreeCAD and the provided step file just loads forever.

These are not a 100% recreation of their original design. The skirts have a 5mm border and smaller features like keystone holes have a 3mm border. These can easily be adjusted in CAD by changing the "modifier" body.

Slicer Settings

The files are not optimized for any particular slicer. Just switch the object "modifier" to the type modifier and adjust the settings of the modifier to:

  • 0 walls

  • 0 bottom and top layers

  • line width 0.42mm

  • 22% infill

  • infill type honeycomb

  • direction of infill --> adjust until infill is aligned with part

The front and back pieces were the belt covers attach need support.

Example for Orca Slicer:

My part was also rotated 45°:

Fan Mounting

The fans are spaced away from the mesh to reduce turbulence and thus noise. To mount the fans you need heatset inserts (Voron standard) an long enough M3 screws. I only used 2 screws per fan.

Tagi