Fractal terra top fan mount 120mm Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fractal terra top fan mount to fit 120mm fans up to 25mm height Remix
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Caution: Currently the top metal plate does not fit. You can see it in the original model. The top mounting holes need to be remeasured and redesigned.
Fractal terra top fan mount to fit 120mm fans up to 25mm height
At least 3 walls for the big part are recommended, because with 2 you will see the infill.
I created a fan mount plate inlay to mount the fans to reduce vibration, should work without too.
Used software:
Orca slicer
Onshape
The part is split to fit a 250mm build plate. The full part is a bit over 340mm and included in the 3mf file.
The two big parts have holes and they will be connected with dowels. To connect them start with one part where you put super glue in a hole and put a dowel in for every hole. After that put super glue in the holes of the other part and on the surface that connects and put the two big parts together. Hold them for some time and then put it upright to leave it for a while until its dried.
Links to Onshape:
https://cad.onshape.com/documents/5c1513321a4dacbfcc16826d/w/79293fd7e62033701b9b6368/e/6b416d04566907b3d0410395?renderMode=0&leftPanel=false&uiState=6a5e89ae6b92df910b01b4f3
https://cad.onshape.com/documents/dcfcf66ce869189bccc37400/w/9d10fbce4c165e79bf39a6de/e/4cbff984371065296110aa0b?renderMode=0&uiState=6a5e89a1b56a42ec746d57cf