Strap clip for Garmin inReach Mini 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This clip mounts to the back of a Garmin inReach Mini 3, allowing you to attach it to a backpack strap or thin belt.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
For some inexplicable reason, the inReach Mini 3 doesn't come with a way to clip or strap it to anything!
Use this clip to attach your Garmin to backpack straps or thin belts (3mm x 50mm max). I haven't tried it on the Mini 3 Plus but I think (???) they're the same.
USE AT YOUR OWN RISK!
I have not performed any testing or engineering review on this design so I can't guarantee it will always work as needed. This is especially relevant because the inReach is meant to help save your life.
Please always check that your SOS devices are in place and secure before relying on them
Please keep a close eye on the communicator during use in case the clip starts to fail
Please Please Please don't put yourself in situations where you need to use your SOS device
Requires a 6mm M3x0.5 countersunk screw.
Here are links to Home Depot, Amazon, and McMaster-Carr examples. It could also work with other 6mm M3x0.5 screws (such as button head or cap screws) if you can't find one.
Print notes:
This model has relatively little print-bed contact area. Use glue or consider adding a brim.
Fiber filled Nylon (PA-CF) is probably a good material for this for its toughness in outdoor conditions.
I would not recommend using biodegradable materials like PLA since this is for outdoor use.
This model was made from scratch in FreeCad. I really don't know what I'm doing with that software (which I think is a common sentiment) but I've included the source file if you want to mess with it.