1 / 2
Akona Classic Scuba Regulator Bag crush protection liner — zdjęcie 1
1 / 2

Akona Classic Scuba Regulator Bag crush protection liner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Inner hard-side crush protection liner for Akona scuba regulator bag.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
26
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a crush-protection liner for an Akona Classic scuba regulator bag (https://www.amazon.com/dp/B0CWJ8ZSM6)

Helps to mitigate crush damage when your scuba bag winds up at the bottom of the pile in the airplane and/or transfer van's cargo hold. The photos of mine have been in service for 2 years.

I printed in PLA+ with 20% fill.  Sides printed flat with 3 perimeters and 3 top/bottom layers.  Same on the corners plus supports. a couple drops of CA glue on each of the dovetails secures them effectively.

Tagi