1 / 2
Akona Classic Scuba Regulator Bag crush protection liner
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inner hard-side crush protection liner for Akona scuba regulator bag.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a crush-protection liner for an Akona Classic scuba regulator bag (https://www.amazon.com/dp/B0CWJ8ZSM6)
Helps to mitigate crush damage when your scuba bag winds up at the bottom of the pile in the airplane and/or transfer van's cargo hold. The photos of mine have been in service for 2 years.
I printed in PLA+ with 20% fill. Sides printed flat with 3 perimeters and 3 top/bottom layers. Same on the corners plus supports. a couple drops of CA glue on each of the dovetails secures them effectively.
