Desiccant Box with Hygrometer

I needed a simple and sturdy desiccant box with specific dimensions to fit within existing storage solutions to maintain and remove humidity from the storage containers they would be placed in. I was having issues with ones already available on printables either not fitting my specific dimension needs to being a little too fragile for my liking and spilling/clean up desiccant material is not fun, especially when you have a dog that will eat anything off your carpet, so being ultra sturdy was also a big requirement for me. Because of that, yes these are a little on the thicker side with less free area openings but they still work well and serve their purpose as designed. 

Print the base and either one of the tops to get started. Per desiccant box, you will at minimum need (4) M3 heat-set inserts and (3) M3x4 x6 or x8, countersunk screws. Whichever of those size screws you have will work. If you chose the hygrometer top you will obviously need (1) Hygrometer per box you assemble.

As always I have provided, STLs for those that just want to print and make it, and I've also provided the source CAD files (Solidworks) and STEP for those that want to tinker around with the files themselves.

These are the links for the desiccant material I use and the hygrometers. They are not an affiliate link, just a regular amazon link.

Hygrometer - https://www.amazon.com/dp/B0DZ6L65Y9?ref=ppx_yo2ov_dt_b_fed_asin_title

Rechargeable Desiccant Material - https://www.amazon.com/dp/B01I5Y2DG6?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1

Thank you for your interest in my page/models! Its greatly appreciated! 
-EddieSha