LSI 9211-8i Full Height PCI Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a PCI full height bracket for my LSI 9211-8i HBA card since it didn't come with one.
- Ocena
- 4,75 / 5
- Polubienia
- 33
- Pobrania
- 507
- Wydruki
- 5
- Wyświetlenia
- 2312
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a PCI full height bracket for my LSI 9211-8i HBA card since it didn't come with one.
I used two M3x8 screws that can cut their own threads, but you can also use M3 nuts to secure them (I did).
The two holes are spaces 54mm apart. I included the .step file in case you want to adjust the spacing, remix it, etc.
PLA should be fine. I used PETG since what I have loaded up.
Print with supports!
Print instructions
Category: Computer Print Settings
Printer Brand: Creality
Printer: Ender 3 Pro
Rafts: No
Supports: Yes
Resolution: 0.2
Infill: 100%
Filament: Yoyi PETG Red