IKEA Trofast Shelf Holder Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket that holds the IKEA Trofast shelf on top of the factory container bracket. The shelves are intended to slide…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Bracket that holds the IKEA Trofast shelf on top of the factory container bracket. The shelves are intended to slide into the same slots as the containers, but that leaves a large unused gap between the shelf and the next container. This allows for the shelf to rest and prevent it from easily sliding.
Bracket is symmetric, so it works both on the left and right side.
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator 2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
5 shells
The item is long, so I had to print on a diagonal in order to fit on the print bed.
Category: Organization