SMLIGHT SLZB06 Wall Plate Zigbee Etc. Antenna Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wallplate mount to attach a POE driven SMLIGHT Zigbee or other coordinator to a 1 gang box or lv bracket
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This is a nice way to mount a POE SMLIGHT coordinator to a normal box, I wanted something that would clean up the wiring nicely but look really well done.
Print the keystone assembly with the flat part of the circle on the bed, print the wall plate where the top size facing up is the part that would be visible from the wall, you will need normal non organic supports for that part. The slide on coordinator mount you will want to print with the cut out on the bed and use organic supports. The strength here isnt too important but for the wall plate you want it pretty rigid so it doesnt flex when screwed to the box. I recommend for the wall plate 4 walls and 40 percent infill you can dial that down a little on the other parts but overall this doesnt use much filament. Also of note I used PETG and it went great, I think PLA or others would also work really well, PLA matte might be even better.
Note how I used a slimline patch cable, that is what the slot is designed to allow some play down the middle, and a heads up its a tight fit, .5ft slimline cat6a is what this expects but you do you, and its a bit of a pain to get it in but as you can see from the pics it looks really great when installed, also to keep the keystone module from popping out of the back mount on the wallplate there is a little channel for a small zip tie.