XL Expo Marker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very big Expo Marker that holds an Expo Marker
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Someone in the office made and brought a Giant pen so I wanted to have fun so I made a Oversize Expo marker that will hold a regular expo marker (it is usable to write with). In the Cover photo the red capped marker is a regular sized marker for comparison.
The Marker Body is 215.75mm tall
The Marker Cap is 61.42mm tall
The Oversize Cap has been designed for a "tight" fit and a Expo bottom to push into, most-all caps will stay in place after being pressed on (intense use may change this)
the Marker body has also been designed for a "very tight" fit. You can push it in manually but it will require pliers for extraction as I did not want it to come out by accident.
The Marker Base has a spot to put a second expo marker and the cavity in the base of the marker body has room for an expo marker if installed into the base.
I have included the more 3d printer friendly version of the threaded base and body as the base model but I did include the original less friendly models in the event those don't work
I have included a base helper tool if you get the base stuck or to make things easier for initial threading