XL Expo Marker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Very big Expo Marker that holds an Expo Marker
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Someone in the office made and brought a Giant pen so I wanted to have fun so I made a Oversize Expo marker that will hold a regular expo marker (it is usable to write with). In the Cover photo the red capped marker is a regular sized marker for comparison.
The Marker Body is 215.75mm tall
The Marker Cap is 61.42mm tall
The Oversize Cap has been designed for a "tight" fit and a Expo bottom to push into, most-all caps will stay in place after being pressed on (intense use may change this)
the Marker body has also been designed for a "very tight" fit. You can push it in manually but it will require pliers for extraction as I did not want it to come out by accident.
The Marker Base has a spot to put a second expo marker and the cavity in the base of the marker body has room for an expo marker if installed into the base.
I have included the more 3d printer friendly version of the threaded base and body as the base model but I did include the original less friendly models in the event those don't work
I have included a base helper tool if you get the base stuck or to make things easier for initial threading