Meshtastick Modular System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The modular system consists of a main body, a battery, a slider panel, a holster and a charging station.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modular system for Heltec V2,V3 and Fake Tec boards.
The modular system consists of a main body, a battery, a slider panel, a holster and a charging station.
The case is designed to accommodate a board, an SMA connector, and contacts for battery power. There is a cutout for the type-c connector and fasteners for the rope.
Battery - two 18650 batteries are placed inside. The maximum size of the flat compartment for lithium-ion batteries is 70 mm x 40 mm x 18 mm (LxWxH). There are handles on the top and side that you can use to carry or hang the battery with the board attached.
Slider panel - allows you to attach the battery with the board to the strap of a backpack or tie it with a cable to something.
Holster - has a bracket and a slider panel that allows you to attach the battery to the case, for example, on a belt.
Charging station - has the ability to place 1 or 2 batteries on it. There are cutouts on the back cover for wall mounting.
What will be needed for the assembly:
Four (4) M3x6 mm screws for housing assembly
Two (2) M2x4 countersunk head screws for battery assembly
Four (4) M2x4 screws for mounting the charging station
Nickel-plated tape for power contacts between the battery pack and the housing with the board as well as the charging station
Write your feedback about this version of the modular system for Meshing, as well as your suggestions for adding new elements!)